Struct sep2_common::packages::der::DERControlType

pub struct DERControlType(/* private fields */);

Available on crate feature der only.

Control modes supported by the DER. Bit positions SHALL be defined as follows:

0 - Charge mode

1 - Discharge mode

2 - opModConnect (Connect / Disconnect - implies galvanic isolation)

3 - opModEnergize (Energize / De-Energize)

4 - opModFixedPFAbsorbW (Fixed Power Factor Setpoint when absorbing active power)

5 - opModFixedPFInjectW (Fixed Power Factor Setpoint when injecting active power)

6 - opModFixedVar (Reactive Power Setpoint)

7 - opModFixedW (Charge / Discharge Setpoint)

8 - opModFreqDroop (Frequency-Watt Parameterized Mode)

9 - opModFreqWatt (Frequency-Watt Curve Mode)

10 - opModHFRTMayTrip (High Frequency Ride Through, May Trip Mode)

11 - opModHFRTMustTrip (High Frequency Ride Through, Must Trip Mode)

12 - opModHVRTMayTrip (High Voltage Ride Through, May Trip Mode)

13 - opModHVRTMomentaryCessation (High Voltage Ride Through, Momentary Cessation Mode)

14 - opModHVRTMustTrip (High Voltage Ride Through, Must Trip Mode)

15 - opModLFRTMayTrip (Low Frequency Ride Through, May Trip Mode)

16 - opModLFRTMustTrip (Low Frequency Ride Through, Must Trip Mode)

17 - opModLVRTMayTrip (Low Voltage Ride Through, May Trip Mode)

18 - opModLVRTMomentaryCessation (Low Voltage Ride Through, Momentary Cessation Mode)

19 - opModLVRTMustTrip (Low Voltage Ride Through, Must Trip Mode)

20 - opModMaxLimW (Maximum Active Power)

21 - opModTargetVar (Target Reactive Power)

22 - opModTargetW (Target Active Power)

23 - opModVoltVar (Volt-Var Mode)

24 - opModVoltWatt (Volt-Watt Mode)

25 - opModWattPF (Watt-PowerFactor Mode)

26 - opModWattVar (Watt-Var Mode)

All other values reserved.

Implementations

impl DERControlType

pub const ChargeMode: Self = _

pub const DischargeMode: Self = _

pub const OpModConnect: Self = _

pub const OpModEnergize: Self = _

pub const OpModFixedPFAbsorbW: Self = _

pub const OpModFixedPFInjectW: Self = _

pub const OpModFixedVar: Self = _

pub const OpModFixedW: Self = _

pub const OpModFreqDroop: Self = _

pub const OpModFreqWatt: Self = _

pub const OpModHFRTMayTrip: Self = _

pub const OpModHFRTMustTrip: Self = _

pub const OpModHVRTMayTrip: Self = _

pub const OpModHVRTMomentaryCessation: Self = _

pub const OpModHVRTMustTrip: Self = _

pub const OpModLFRTMayTrip: Self = _

pub const OpModLFRTMustTrip: Self = _

pub const OpModLVRTMayTrip: Self = _

pub const OpModLVRTMomentaryCessation: Self = _

pub const OpModLVRTMustTrip: Self = _

pub const OpModMaxLimW: Self = _

pub const OpModTargetVar: Self = _

pub const OpModTargetW: Self = _

pub const OpModVoltVar: Self = _

pub const OpModVoltWatt: Self = _

pub const OpModWattPF: Self = _

pub const OpModWattVar: Self = _

impl DERControlType

pub const fn empty() -> Self

Get a flags value with all bits unset.

pub const fn all() -> Self

Get a flags value with all known bits set.

pub const fn bits(&self) -> u32

Get the underlying bits value.

The returned value is exactly the bits set in this flags value.

pub const fn from_bits(bits: u32) -> Option<Self>

Convert from a bits value.

This method will return None if any unknown bits are set.

pub const fn from_bits_truncate(bits: u32) -> Self

Convert from a bits value, unsetting any unknown bits.

pub const fn from_bits_retain(bits: u32) -> Self

Convert from a bits value exactly.

pub fn from_name(name: &str) -> Option<Self>

Get a flags value with the bits of a flag with the given name set.

This method will return None if name is empty or doesn’t correspond to any named flag.

pub const fn is_empty(&self) -> bool

Whether all bits in this flags value are unset.

pub const fn is_all(&self) -> bool

Whether all known bits in this flags value are set.

pub const fn intersects(&self, other: Self) -> bool

Whether any set bits in a source flags value are also set in a target flags value.

pub const fn contains(&self, other: Self) -> bool

Whether all set bits in a source flags value are also set in a target flags value.

pub fn insert(&mut self, other: Self)

The bitwise or (|) of the bits in two flags values.

pub fn remove(&mut self, other: Self)

The intersection of a source flags value with the complement of a target flags value (&!).

This method is not equivalent to self & !other when other has unknown bits set. remove won’t truncate other, but the ! operator will.

pub fn toggle(&mut self, other: Self)

The bitwise exclusive-or (^) of the bits in two flags values.

pub fn set(&mut self, other: Self, value: bool)

Call insert when value is true or remove when value is false.

pub const fn intersection(self, other: Self) -> Self

The bitwise and (&) of the bits in two flags values.

pub const fn union(self, other: Self) -> Self

The bitwise or (|) of the bits in two flags values.

pub const fn difference(self, other: Self) -> Self

The intersection of a source flags value with the complement of a target flags value (&!).

This method is not equivalent to self & !other when other has unknown bits set. difference won’t truncate other, but the ! operator will.

pub const fn symmetric_difference(self, other: Self) -> Self

The bitwise exclusive-or (^) of the bits in two flags values.

pub const fn complement(self) -> Self

The bitwise negation (!) of the bits in a flags value, truncating the result.

impl DERControlType

pub const fn iter(&self) -> Iter<DERControlType>

Yield a set of contained flags values.

Each yielded flags value will correspond to a defined named flag. Any unknown bits will be yielded together as a final flags value.

pub const fn iter_names(&self) -> IterNames<DERControlType>

Yield a set of contained named flags values.

This method is like iter, except only yields bits in contained named flags. Any unknown bits, or bits not corresponding to a contained flag will not be yielded.

Trait Implementations

impl Binary for DERControlType

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter.

impl BitAnd<DERControlType> for DERControlType

fn bitand(self, other: Self) -> Self

The bitwise and (&) of the bits in two flags values.

type Output = DERControlType

The resulting type after applying the & operator.

impl BitAndAssign<DERControlType> for DERControlType

fn bitand_assign(&mut self, other: Self)

The bitwise and (&) of the bits in two flags values.

impl BitOr<DERControlType> for DERControlType

fn bitor(self, other: DERControlType) -> Self

The bitwise or (|) of the bits in two flags values.

type Output = DERControlType

The resulting type after applying the | operator.

impl BitOrAssign<DERControlType> for DERControlType

fn bitor_assign(&mut self, other: Self)

The bitwise or (|) of the bits in two flags values.

impl BitXor<DERControlType> for DERControlType

fn bitxor(self, other: Self) -> Self

The bitwise exclusive-or (^) of the bits in two flags values.

type Output = DERControlType

The resulting type after applying the ^ operator.

impl BitXorAssign<DERControlType> for DERControlType

fn bitxor_assign(&mut self, other: Self)

The bitwise exclusive-or (^) of the bits in two flags values.

impl Clone for DERControlType

fn clone(&self) -> DERControlType

Returns a copy of the value.

fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source.

impl Debug for DERControlType

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter.

impl Default for DERControlType

fn default() -> DERControlType

Returns the “default value” for a type.

impl Display for DERControlType

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter.

impl Extend<DERControlType> for DERControlType

fn extend<T: IntoIterator<Item = Self>>(&mut self, iterator: T)

The bitwise or (|) of the bits in each flags value.

fn extend_one(&mut self, item: A)

🔬This is a nightly-only experimental API. (extend_one)

Extends a collection with exactly one element.

fn extend_reserve(&mut self, additional: usize)

🔬This is a nightly-only experimental API. (extend_one)

Reserves capacity in a collection for the given number of additional elements.

impl Flags for DERControlType

const FLAGS: &'static [Flag<DERControlType>] = _

The set of defined flags.

type Bits = u32

The underlying bits type.

fn bits(&self) -> u32

Get the underlying bits value.

fn from_bits_retain(bits: u32) -> DERControlType

Convert from a bits value exactly.

fn empty() -> Self

Get a flags value with all bits unset.

fn all() -> Self

Get a flags value with all known bits set.

fn from_bits(bits: Self::Bits) -> Option<Self>

Convert from a bits value.

fn from_bits_truncate(bits: Self::Bits) -> Self

Convert from a bits value, unsetting any unknown bits.

fn from_name(name: &str) -> Option<Self>

Get a flags value with the bits of a flag with the given name set.

fn iter(&self) -> Iter<Self>

Yield a set of contained flags values.

fn iter_names(&self) -> IterNames<Self>

Yield a set of contained named flags values.

fn is_empty(&self) -> bool

Whether all bits in this flags value are unset.

fn is_all(&self) -> bool

Whether all known bits in this flags value are set.

fn intersects(&self, other: Self) -> boolwhere Self: Sized,

Whether any set bits in a source flags value are also set in a target flags value.

fn contains(&self, other: Self) -> boolwhere Self: Sized,

Whether all set bits in a source flags value are also set in a target flags value.

fn insert(&mut self, other: Self)where Self: Sized,

The bitwise or (|) of the bits in two flags values.

fn remove(&mut self, other: Self)where Self: Sized,

The intersection of a source flags value with the complement of a target flags value (&!).

fn toggle(&mut self, other: Self)where Self: Sized,

The bitwise exclusive-or (^) of the bits in two flags values.

fn set(&mut self, other: Self, value: bool)where Self: Sized,

Call [Flags::insert] when value is true or [Flags::remove] when value is false.

fn intersection(self, other: Self) -> Self

The bitwise and (&) of the bits in two flags values.

fn union(self, other: Self) -> Self

The bitwise or (|) of the bits in two flags values.

fn difference(self, other: Self) -> Self

The intersection of a source flags value with the complement of a target flags value (&!).

fn symmetric_difference(self, other: Self) -> Self

The bitwise exclusive-or (^) of the bits in two flags values.

fn complement(self) -> Self

The bitwise negation (!) of the bits in a flags value, truncating the result.

impl FromIterator<DERControlType> for DERControlType

fn from_iter<T: IntoIterator<Item = Self>>(iterator: T) -> Self

The bitwise or (|) of the bits in each flags value.

impl FromStr for DERControlType

type Err = String

The associated error which can be returned from parsing.

fn from_str(s: &str) -> Result<Self, Self::Err>

Parses a string s to return a value of this type.

impl IntoIterator for DERControlType

type Item = DERControlType

The type of the elements being iterated over.

type IntoIter = Iter<DERControlType>

Which kind of iterator are we turning this into?

fn into_iter(self) -> Self::IntoIter

Creates an iterator from a value.

impl LowerHex for DERControlType

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter.

impl Not for DERControlType

fn not(self) -> Self

The bitwise negation (!) of the bits in a flags value, truncating the result.

type Output = DERControlType

The resulting type after applying the ! operator.

impl Octal for DERControlType

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter.

impl Ord for DERControlType

fn cmp(&self, other: &DERControlType) -> Ordering

This method returns an Ordering between self and other.

fn max(self, other: Self) -> Selfwhere Self: Sized,

Compares and returns the maximum of two values.

fn min(self, other: Self) -> Selfwhere Self: Sized,

Compares and returns the minimum of two values.

fn clamp(self, min: Self, max: Self) -> Selfwhere Self: Sized + PartialOrd<Self>,

Restrict a value to a certain interval.

impl PartialEq<DERControlType> for DERControlType

fn eq(&self, other: &DERControlType) -> bool

This method tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Rhs) -> bool

This method tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.

impl PartialOrd<DERControlType> for DERControlType

fn partial_cmp(&self, other: &DERControlType) -> Option<Ordering>

This method returns an ordering between self and other values if one exists.

fn lt(&self, other: &Rhs) -> bool

This method tests less than (for self and other) and is used by the < operator.

fn le(&self, other: &Rhs) -> bool

This method tests less than or equal to (for self and other) and is used by the <= operator.

fn gt(&self, other: &Rhs) -> bool

This method tests greater than (for self and other) and is used by the > operator.

fn ge(&self, other: &Rhs) -> bool

This method tests greater than or equal to (for self and other) and is used by the >= operator.

impl PublicFlags for DERControlType

type Primitive = u32

The type of the underlying storage.

type Internal = InternalBitFlags

The type of the internal field on the generated flags type.

impl Sub<DERControlType> for DERControlType

fn sub(self, other: Self) -> Self

The intersection of a source flags value with the complement of a target flags value (&!).

This method is not equivalent to self & !other when other has unknown bits set. difference won’t truncate other, but the ! operator will.

type Output = DERControlType

The resulting type after applying the - operator.

impl SubAssign<DERControlType> for DERControlType

fn sub_assign(&mut self, other: Self)

The intersection of a source flags value with the complement of a target flags value (&!).

This method is not equivalent to self & !other when other has unknown bits set. difference won’t truncate other, but the ! operator will.

impl UpperHex for DERControlType

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter.

impl Validate for DERControlType

fn validate(&self) -> Result<(), String>

impl YaDeserialize for DERControlType

fn deserialize<R: Read>(reader: &mut Deserializer<R>) -> Result<Self, String>

impl YaSerialize for DERControlType

fn name() -> &'static strwhere Self: Sized,

fn serialize<W: Write>(&self, writer: &mut Serializer<W>) -> Result<(), String>

fn serialize_attributes( &self, attributes: Vec<OwnedAttribute>, namespace: Namespace ) -> Result<(Vec<OwnedAttribute>, Namespace), String>

impl Copy for DERControlType

impl Eq for DERControlType

impl StructuralEq for DERControlType

impl StructuralPartialEq for DERControlType